12V 24V 48V to 110VAC 220VAC true sine wave power inverter with 2 sockets and double LED display
MODEL | PS-500 | PS-1000 | PS-1200 | PS-1500 | PS-2000 | PS-2500 | PS-3000 | PS-4000 | PS-5000 |
Power capacity | 500VA | 1000VA | 1200VA | 1500VA | 2000VA | 2500VA | 3000VA | 4000VA | 5000VA |
DC input | |||||||||
Input voltage | 12VDC/24VDC/48VDC(factory set) | 24VDC/48VDC(factory set) | |||||||
Input voltage range | 9.6-15V(for 12V standard) | 19.2-30V(for 24V standard) | |||||||
Idle Current(@12V) | 0.30A | 0.61A | 0.61A | 0.62A | 0.63A | 0.64A | 0.68A | 0.74A | 0.8A |
Efficiency | 90% | ||||||||
Input connector | Red and black DC input terminals | Terminal Block | |||||||
AC output | |||||||||
Output voltage | 120VAC/220VAC(factory set) | ||||||||
Continuous power | 400W | 800W | 1000W | 1200W | 1600W | 2000W | 2400W | 3200W | 4000W |
Surge power | 800W | 1600W | 2000W | 2400W | 3200W | 4000W | 4800W | 6400W | 8000W |
Output wave | Pure Sine Wave | ||||||||
Output frequency | 50/60Hz | ||||||||
Output receptacle | Multinational Socket | Terminal Block | |||||||
Protection | |||||||||
DC under voltage protection | 10V±0.5VDC(for 12V standard) | 20V±0.5VDC(for 24V standard) | |||||||
DC over voltage protection | 15.5V±0.5VDC(for 12V standard) | 20V±0.5VDC(for 24V standard) | |||||||
Overload | CPU controlled auto shut down | ||||||||
DC polarity reverse | Fuse protection | ||||||||
Short circuit | CPU controlled auto shut down | ||||||||
Over heat | CPU controlled auto shut down | ||||||||
Audible Alarm | input DC under,over voltage, fault, overload, overheat | ||||||||
Cooling | intelligent cooling fan | ||||||||
Display & Indicator | |||||||||
Indicator | LED indicator,Green(or Blue) LED glow if the device works properly, Red LED glow if the device is faulty or entering into protection mode. | ||||||||
LCD displayer | Display input and output voltages | ||||||||
Physical | |||||||||
Case | high quality anodized aluminum | ||||||||
Dimensions(mm) | 173X105X57 | 200X150X76 | 276X150X90 | 390X180X110 | 450X180X140 |