SPECIFICATIONS OF 3 PHASE AUTOMATIC VOLTAGE REGULATOR SVC33 SERIES
Model | SVC33-10KVA | SVC33-15KVA | SVC33-20KVA | SVC33-30KVA |
Nominal Power | 10KVA | 15KVA | 20KVA | 30KVA |
Rated Power | 6KW | 9KW | 12KW | 18KW |
Power Factor | 0.6~1.0 |
Input |
Operating Voltage Range | 208~502VAC |
Regulation Voltage Range | 260~430VAC |
Frequency | 50Hz/60Hz |
Connection Type | Input terminal block |
Output |
Output Voltage | 380VAC |
Operating Voltage | 330~430VAC |
High Cut Voltage | 430V |
Low Cut Voltage | 330V |
Frequency | 50Hz/60Hz |
Safety Cycle | 6 Seconds / 180 Seconds Selectable |
Connection Type | Output terminal block |
Regulation |
Regulation % | ± 3%(when input 260~430VAC) |
Number of Taps | Stepless |
Transformer Type | Servo Motor Toroidal auto transformer |
Regulation Type | Servo motor type |
Indicators |
INPUT | This LED light ON when the input voltage in phase A,B & C are within the acceptable range. This LED goes off if any phase is over voltage, under voltage or there is a phase loss. |
POWER | This LED light ON when the device switches on, it goes off when the device switches off. |
DELAY | This LED light ON when the device entering delaying mode, it goes off if the delay cycle complete. |
OUTPUT | This LED light ON when the device has a output voltage, it goes off if the device is entering delay mode, or protection takes place. |
Protection |
Over Temperature | Auto Shutdown at 120 ℃ |
Short Circuit | Auto Shutdown |
Breaker / Fuse | 25A | 32A | 40A | 50A |
Overload | Auto Shutdown |
Over / Under Voltage | Auto Shutdown |
Physical |
Dimension | 845x445x410(mm) | 845x445x410(mm) | 880x505x450(mm) | 880x505x450(mm) |
Product specifications are subject to change without further notice |
DOCUMENTS: